Editing Cloaking device (section)

==Components== 
 
===Off Axis Warp Field Controller===

This component balances the radioactive emissions from the warp drive nacelles. This is necessary because the power source must be in phase with the cloaking device. These devices are used on warp-capable ships without cloaking devices, as well as warp-capable ships with cloaking devices, because they increase the engine operating efficiency. If any one of these controllers are misaligned or in some way damaged it would produce a polarized, magnetic distortion, detectable by other ship's sensors. When a cloaked ship is traveling faster than light in warp, the fact that the ship is moving so quickly makes it difficult to pin-point the location of a ship even if one of the controllers are in some way damaged or misaligned.

===Nullifier Core===

The Nullifier Core dissipates all electromagnetic radiation and other energy emissions produced by the ship and it's crew. This is done by remodulating the energy signature to have the appearance of background radiation energy, as well as reducing the apparent output. The amount of energy required by the nullifier cores to mask a certain amount of energy is not directly proportional to the amount of energy to be masked. For increasingly larger amounts of energy to be masked, the amount of energy required by the nullifier cores to mask that energy becomes ever closer to being equal the amount of energy to be masked. Providing shielding against the entire electromagnetic spectrum is energy-costly, but necessary if a ship is within close proximity. However, if there are no ships within the immediate vicinity, then the nullifier cores are capable of dissipating electromagnetic radiation on the wavelengths that would only be detectable on long-range scanners, ignoring the wavelengths detectable on only short-range scanners. The green coloration of a ship is necessary on cloaking devices Mk 3.0 through Mk 3.2, because of problems with energetic effects occurring inside the cloak as a result of trapped spurious thermal emissions within the cloaking field. Another necessary function of the nullifier cores is to create a null area of gravity between the ship and the cloaking field. So that any gravity coming from the ship does not interfere with the cloaking field, or be detected by a gravimetric distortion mapping scanner on another ship.
 
===Cloaking Generator Coils===
Cloaking generator coils use a coherent graviton emission to distort space so that incident electromagnetic radiation and other forms of energy are directed around the ship through subspace at velocities faster than light, making the appearance that the light or energy never left it's original course. One of the main parts of a cloaking generator coil is a graviton polarity source generator. Graviton polarity source generators create a highly focused spatial distortion which directs the course of the energy and light. The graviton polarity sources in each generator feed into subspace field distortion amplifiers that are phase-synchronized with each other by a network of small conduits that allow field bleed for gravitational stability between the graviton polarity sources. These conduits are equipped with tetryon compositors, to prevent a build-up of tetryons in the conduits, which would decrease the operating efficiency and eventually significantly damage the subspace field distortion amplifiers. The flux energy output is directed and focused by a series of subspace field generator coils, according to the energy dispersal pattern. The energy dispersal pattern, or the energy transformational matrix, is the way in which the energy and light is directed around the ship. The actual subspace field generator coils are similar to warp field coils, but they create a multi-layered field in the space around the ship, not also within it. The propulsive, asymmetrical, peristaltic field distortion propels the energy faster than light. This compensates for the extra distance that the energy has to travel around the ship before returning to it's original course, and any red shift or blue shift caused by the Doppler effect, or a gravitational field.
 
The cloaking generator coils are controlled by special purpose, or dedicated, computers designed to perform this specific task. They are extremely fast computers that contain a complex arrays of processors each designed to perform a specific function. These computers must handle huge databases, and perform complex mathematical operations in order to provide an accurate energy dispersal pattern. Input data is provided for the computers by a network of refractometers placed on the hull of the ship. The more refractometers placed on the hull of the ship, the more effective the energy dispersal pattern. The only limiting factor is the speed of the computers, which must provide a real-time energy dispersal pattern to effectively cloak the ship. These computer are completely separate from the computers that perform other ship functions, because they are limited to the specific function built into them. These computers are only required on fine tuned cloaking devices Mk 3.2 and higher.
 
===Magnetic Constriction Coils===
Magnetic constriction coils create a localized magnetic waveguide plane for the energy to pass through in subspace, which ensures proper alignment of the energy when the ship is in warp. If a ship was using the magnetic constriction coils while not in warp, an active magnetic interferometry scanner could detect the use of the coils.
 
===Plasma Coils===
All of the parts of the cloaking generator coils are powered by plasma coils. These coils must all have an identical energy frequency. This is accomplished by a plasma buffer. If there is no plasma buffer, then the cloaking generator coils could easily be disrupted, by something like an ionic pulse.
 
===Dispersal Fields===
There are many forms of energy dispersal patterns, some more energy efficient or more anti-detection effective than others. The energy dispersal pattern for a ship must be very carefully calculated. There are generally two classifications of energy dispersal patterns: spherical cloaking, and wavemapped cloaking.